1. Correctly identify the quality of PPR pipes: the real PPR pipes shall comply with the standard ISO / DIS 15874.2-1999 <>< plastic="" piping="" system="" for="" cold="" and="" hot="" water="" -="" ppr="" part="" ii="" pipes=""> > the pipe fittings shall comply with the standard ISO / DIS 15874.2-1999 <>< plastic="" piping="" system="" for="" cold="" and="" hot="" water="" -="" ppr="" part="" iii="" pipe="" fittings=""> >; The performance of pseudo PPR pipes and fittings cannot pass the above standards. It should be noted that the service life of pseudo PPR tubes is only 1-5 years, while the service life of real PPR tubes is more than 50 years.
2. Pay attention to the determination of overall service factor C (i.e. safety factor) of PPR pipeline:
For general occasions, and keep the temperature ＜ 70 degree for a long time, C = 1.25 can be selected; In important occasions, with long-term continuous service temperature Greater than or equal to 70 degree , and it is possible to operate at higher temperature for a long time, optional C = 1.5;
3. For cold water ( Less than or equal to 40 degree ) system, p.n1 is selected 0 1.6Mpa pipes and fittings;
For hot water system, select Greater than or equal to pN2 0mpa pipes and fittings.
